1965 Ford Mustang Fastback K-Code 4-Speed
This 1965 Ford Mustang K-code Fastback, one of fewer than 1% of 1965 Mustangs built with the 271-horsepower high-performance 289ci V8, was sold new at Millard Reeves Ford in Georgia and has been built into a GT-350 tribute by Salter's Mustangs of Pace, Florida. Finished in Wimbledon White with Guardsman Blue stripes over a black interior, the Dearborn-built Fastback wears a block casting of C5AE-6015-A, 4L25, and date stamping of 4M14R, now bored to 293ci and equipped with a Shelby intake manifold, ported and polished 1965 heads with hardened valve seats, a Competition Cam, Holley 600 double-pumper, roller rockers, and Shelby valve cover breathers. The rebuilt Toploader four-speed is matched to a Hurst Competition Plus shifter, a Hayes competition clutch, and a Ford 9-inch rear with a 3.50:1 Auburn limited-slip differential. Front disc brakes with an adjustable proportioning valve are fitted. The body shows some flaws in the paint indicative of an older restoration. The odometer shows 22,872 miles, and total mileage is unknown; the speedometer was repaired and reset to zero under prior ownership with 78,000 miles documented at the time of reset. A FOMOCO Certificate of Origin and documentation extending to the original 1965 sale are included. The selling dealer acquired the car in Wichita, Kansas, in 2026.















NOT AVAILABLEFOR PRE-1981
ESTIMATE SHIPPING COST
Enter your zip code or city to the left to calculate your estimated shipping cost.
DUTCH AUCTION DETAILS
NOT AVAILABLEFOR PRE-1981
ESTIMATE SHIPPING COST
Enter your zip code or city to the left to calculate your estimated shipping cost.
VEHICLE DETAILS
OVERVIEW
The K-code 289 High Performance was Ford's top engine offering for the 1965 Mustang, a solid-lifter, high-compression unit producing 271 horsepower that required a four-speed manual transmission and was fitted to fewer than 1% of 1965 Mustang production. The K-code Fastback is the rarest and most desirable configuration of the first-generation car: the combination of the high-performance engine, Fastback body, and four-speed accounts for a small fraction of that already-limited number. Carroll Shelby's GT-350 was itself a K-code Fastback, transformed by Shelby American in 1965 for sanctioned SCCA B-Production competition; the connection between the K-code platform and the GT-350 is direct and documented, making the tribute interpretation of this build historically grounded rather than aspirational. This example's FOMOCO Certificate of Origin, documentation to 1965, positions it at the documented end of the K-code market. Parts support for the 289 HP is strong through Mustang specialists including Mustangs Unlimited and National Parts Depot, and the K-code community is among the most active and knowledgeable of any first-generation Mustang group.
EXTERIOR
Wimbledon White covers the Fastback body with Guardsman Blue racing stripes running over the hood and roof, the correct GT-350 color combination. GT.350 rocker panel graphics are applied. A Shelby-style black mesh grille replaces the factory corral; a hood scoop is fitted. Five American Racing Torque Thrust wheels wear BFGoodrich 225/60-15 tires with custom one-off Shelby center caps. The restoration was carried out at Salter's Mustangs in Pace, Florida, and included new floor pans and new frame rail extensions.
INTERIOR
The original red vinyl has been replaced with a black interior consistent with the GT-350 tribute presentation. A wood-rimmed Shelby GT-350 three-spoke steering wheel with a Cobra GT-350 horn button is fitted. The factory instrument cluster is retained; a dash-top pod mounts a period tachometer on the passenger side. The Hurst Competition Plus shifter rises from the center tunnel. A factory-look radio occupies the center stack below a Mustang badge plate. Black carpet runs the floor throughout.
MECHANICAL
The block (C5AE-6015-A) has been bored 0.030 over to 293ci and fitted with flat-top pistons, a balanced rotating assembly with ARP 190,000 psi rod bolts, a Shelby intake manifold, a Holley 600 double-pumper carburetor, ported and polished 1965 K-code heads with hardened valve seats, a Competition Cam (.534 lift), roller rocker arms, and Shelby valve cover breathers. A correct K-code double-spring fuel pump with canister filter and 5/16-inch stainless steel fuel lines are fitted. Tri-Y headers feed a Flowmaster dual exhaust. A Modine 4-core radiator is installed. The Toploader four-speed close-ratio transmission was rebuilt at 83,900 miles and is paired with a Hayes competition clutch and Hurst Competition Plus shifter. A Ford 9-inch rear axle with a 3.50:1 Auburn limited-slip differential is installed. Front disc brakes with an adjustable proportioning valve replace the original front drums. Shelby OEM springs and traction bars are fitted. A new gas tank and sending unit were installed during the restoration. The odometer shows 22,872 miles; total mileage is unknown. The speedometer was repaired and reset to zero under prior Florida ownership, with 78,000 miles on the odometer documented at that time.
ADDITIONAL DETAILS
Modifications
- 289ci block bored to 293ci
- Shelby intake manifold + Shelby valve cover breathers
- Competition Cam
- Ported/polished 1965 K-code heads
- Holley 600 double-pumper
- Auburn limited-slip
- Front disc brake conversion with adjustable proportioning valve
Ownership History
Sold new at Millard Reeves Ford in Georgia and has been built into a GT-350 tribute by Salter's Mustangs of Pace, Florida; ownership documented from at least 1995. The selling dealer acquired the car in Wichita, Kansas, in 2026. Documentation included: FOMOCO Certificate of Origin, records extending to the 1965 sale.
Additional Notes
Original exterior color Rangoon Red (code J), original interior red vinyl (trim code 25) per data plate.
VIDEO TOUR
ACTIVITY FEED
No activity yet
Be the first to ask a question or share your thoughts!
PICK YOUR PRICE
Help drive the excitement! Guess the final sale price and see how you stack up against your fellow car enthusiasts.